Deadline: EOD Tuesday, March 12th
Pull the Lab 10 files from the lab starter repository with
git pull staff master
All the work in this lab will be done from the digital logic simulation program Logisim Evolution, which is included in the lab starter files.
IMPORTANT: Please use the .jar file we’ve given you, not the version of Logisim that is downloaded on the lab computers! And a note: Logisim does not save your work as you go along, and it does not automatically create a new .circ file when you open it! Save when you start, and save frequently as you work.
You can open Logism via:
java -jar logisim-evolution.jar
IMPORTANT: Logism is a Java program that requires a GUI, so doing the lab over terminal won’t work (without window forwarding, detailed below). If you wish to work on the lab locally, ensure you have Java installed on your local machine, and pull the latest lab starter files to your local machine. Then, you should be open the program as above. If you wish to run the program over the terminal, you will need to add the
-X flag to your
SSH command to enable window forwarding (for example,
ssh -X [email protected]). On Windows machines, you may need to additionally install Xming.
We’ll begin by creating a very simple circuit just to get the feel for placing gates and wires. Before you start, take note of a useful feature: the zoom function! It’s in the bottom left corner, and will make your life much easier for the next couple weeks.
Start by clicking the
AND gate button. This will cause the shadow of an
AND gate to follow your cursor around. Click once within the main schematic window to place an
Input Pin button. Now, place two input pins somewhere to the left of your
Output Pin button. Then place an output pin somewhere to the right of your
AND gate. Your schematic should look something like this at this point:
Select tool button. Click and drag to connect the input pins to the left side of the
AND gate. This will take several steps, as you can only draw vertical and horizontal wires. Just draw a wire horizontally, release the mouse button, then click and drag down starting from the end of the wire to continue vertically. You can attach the wire to any pin on the
AND gate on the left side. Repeat the same procedure to connect the output of the
AND Gate (right side) to the output pin. After completing these steps your schematic should look roughly like this:
Finally, click the
Poke tool and try clicking on the input pins in your schematic. Observe what happens. Does this match with what you think an
AND Gate should do?
Just as C programs can contain helper functions, a schematic can contain subcircuits. In this part of the lab, we will create several subcircuits to demonstrate their use.
IMPORTANT NOTE: Logisim Evolution guidlines say you cannot name a subcircuit after a keyword (e.g.
NAND), also circuit names must start with “A-Za-z”, so no numbers.
Follow the steps below and show your final circuit to your TA at checkoff (remember to save!):
Create a new schematic (
File->New) for your work.
Create a new subcircuit (
Project->Add Circuit). You will be prompted for a name for the subcircuit; call it
NAND1 (note the
1 at the end; because there is a component called
NAND, you cannot call it
In the new schematic window that you see create a simple
NAND circuit with 2 input pins on the left side and an output pin on the right side. Do this without using the built-in
NAND gate from the Gates folder (i.e. only use the
NOT gates provided next to the selection tool icon). You can change the labels for the inputs and output by selecting the input/output using the select tool and changing the property
Label in the bottom left of the window.
Go back to your
main schematic by double-clicking
main in the circuit selector at the left of the screen. Your original (blank) schematic will now be displayed, but your
NAND1 circuit has been stored.
Now, single click the word
NAND1 in the list. This will tell Logisim that you wish to add your
NAND1 circuit into your
Try placing your
NAND1 circuit into the
main schematic. If you did it correctly, you should see a gate with 2 input pins on the left and one output pin on the right. Try hooking input pins and output pins up to these and see if it works as you expect.
Repeat these steps to create several more subcircuits:
2-to-1 MUX, and
4-to-1 MUX. Do not use any built in gates other than
NOT. Once you’ve built a subcircuit, you may (and are encouraged to) use it to build others.
Hint: Try writing a truth table. You might also find the lecture slides useful for a refresher on how to build these. You may want to consider using some of your custom subcircuits when designing the others.
At this point, make sure that you are comfortable with the Logisim environment, creating sub-circuits, and re-using such circuits in other circuits.
Let’s implement a circuit that increments a value ad infinitum. The difference between this circuit and the circuits you’ve built for lab so far is that it will store this value in the state of a register.
The following steps will show you how to add registers to your circuit. Complete the steps and show the final circuit to your TA (remember to save!):
Create a new subcircuit (
Project->Add Circuit). Name this new subcircuit,
Load in the
Arithmetic Library if it is not already loaded (go to
Project->Load Library->Built in
Library and select
Arithmetic). This library contains elements that will perform basic mathematical operations. When you load the library, the circuit browser at left will have a new
Select the adder subcircuit from the
Arithmetic library and place the adder into your
Load in the
Memory Library if it is not already loaded (go to
Project->Load Library->Built in
Library and select
Memory). This library contains memory elements used to keep state in a circuit. A new
Memory folder will appear in the circuit browser.
Select the register from the
Memory folder and place one register into your subcircuit. Below is an image diagraming the parts of a register.
clock to your register. You can find the clock circuit element in the
Wiring folder in the circuit browser.
Selectiontool, you will notice that there is a
Data Bit Widthproperty in the bottom left field of the window. This value determines the number of bits each input and output the adder has. Change this field to
8and the “Incompatible widths” error should be resolved.
Wire an 8-bit constant
1 to the second input of the adder. You can find the
constant circuit element in the
Add two output pins to your circuit so that you may monitor what comes out of the adder and the register. Make sure the output is 8 bits. Thus, by the end, your circuit should look like as follows:
Now let’s see if you built your circuit correctly. Go back to the
main subcircuit by double clicking on
main in the circuit browser.
Single click on your
AddMachine circuit to select it.
Facing property to another direction. Any circuit with the
Facing property can be rotated to accomodate wires as you need them. This will definitely be useful when you do your project.
AddMachine subcircuit into the
AddMachine subcircuit you just placed into
Connect output pins to the
AddMachine subcircuit. Output pins are ordered top to bottom, left to right. Thus, if you followed the schematic above, then the top pin on the right side outputs the value of the adder, and the bottom pin is the output of the register.
Right click on your
AddMachine subcircuit, and select
View AddMachine. This is the ONLY method to preserve state (i.e. keep register values at its current value). Double-clicking on the circuit at the circuit browser at left makes Logisim think you want to edit the circuit instead of just checking what state the circuit has.
Initialize the register value to
1. You can do this by first, clicking on the register value with the poke tool. Then, type the hex value in.
To return to the main circuit while preserving state, go to
Simulate->Go Out To State->main. Alternatively, you can use the keyboard shortcut
Command/Control + Up Arrow
Now start running your circuit by going to
Simulate->Ticks Enabled (or
Command/Control + K). Your circuit should now be outputting a counter in binary form.
At this point, make sure that you are comfortable with designing and simulating simple digital logic circuits in Logisim environment that use a mix of combinational logic and state elements (registers).
Now we’re ready to do something really cool: translate a FSM into a digital logic circuit.
For those of you who need a reminder, FSM stands for Finite State Machine. FSM’s keep track of inputs given, moves between states based on these inputs, and outputs something everytime something is input.
We use a register to store the state of the FSM we’re currently in, and combinational logic to map FSM input & current register state to FSM output & next register state.
Load the given starter file
FSM.circ into Logism. Modify this circuit’s subcircuits
StateBitOne to implement the following FSM:
If two ones in a row or two zeroes in a row have ever been seen, output zeros forever. Otherwise, output a one.
Show this completed circuit to your TA (remember to save!)
Note that the FSM is implemented by the following diagram (the four state names
11 are just names written in binary - they have no direct relationship with the actual zeros and ones of the FSM input/output). Take some time to understand how this diagram implements the FSM:
Observe that the following is a truth table for the FSM (convince yourself of this):
|st1||st0||input||next st1||next st0||output|
We’ve provided you with a starter Logisim circuit to start out in
Note that the top level of the circuit looks almost exactly the same as our previous adder circuit, but now there’s a
FSMLogic block instead of an adder block.
FSMLogic is the combinational logic block for this FSM. We have handled the output bit for you, as it’s the most complicated to simplify and implement. You should complete the circuit by completing the
StateBitZero subcircuits, which produces the next state bits.
At this point, you should have more familiarity with designing and implementing FSMs, and the close relationship between FSMs and digital logic.
Feel free to do each part as separate sub-circuits in the same Logisim file.
The following parts will introduce you to more advanced techniques/concepts in Logisim.
Here are three Logisim features that should both save you a lot of time and make your circuits look much cleaner.
Splitters allow you to take a multi-bit value and split it up into smaller parts, or (despite the name) combine multiple values that are one or more bits into a single value. Here, we split the 4-bit binary number
01, then recombine it with
11 into the final 6-bit number
Click on a splitter to get its menu in the sidebar. You can use this menu to determine the number of arms on your splitter and how many bits should go on each arm. For the circuit above, the left splitter’s menu looks like this:
While the right splitter’s menu looks like this:
Notice that there’s an option called
facing. You can use this to rotate your splitter. Above, see that the splitter on the right is facing West while the splitter on the left is facing East.
If you see an error wire that is orange, this means that your bit width in does not match your bit width out. Make sure that if you’re connecting two components with a wire, you correctly set the bit width in that component’s menu.
A tunnel allows you draw an “invisible wire” to bind two points together. Tunnels are grouped by case-sensitive labels give to a wire. They are used to connect wires like so:
Which has an effect such as the following:
Some care should be taken as to which wires are connected with tunnels to which other wires, such as in this case:
Which in turn has the following effect:
We strongly recommend you use tunnels with Logisim, because they make your circuits much cleaner looking, and therefore easier to debug.
When changing the width of a wire, you should use a bit extender for clarity. For example, consider the following implementation of extending an 8-bit wire into a 16-bit wire:
Whereas the following is much simpler, easier to read, and less error-prone:
Additionally consider the case of throwing out bits. In this example, an 8-bit wire is being converted into a 4-bit wire by throwing out the other bits:
Despite the implications of its name, a bit extender can also do this same operation:
We’re going to construct a circuit that manipulates an 8-bit number.
Complete the following steps to create the splitter circuit, and show this to your TA (remember to save). When you’ve completed the circuit, answer the question in step 11.
Create a new subcircuit and name it
Add an 8-bit input pin to your circuit and label it
Add a 1-bit output pin labeled
Out1 and an 8-bit output pin labeled
Out2 to your circuit.
Go to the
Wiring folder and select the
Splitter circuit. This circuit will take a wire and split it into a set of wires of smaller width. Conversely, it can also take many sets of wires and combine them into a larger bus.
Before you place your circuit, change the
Bit Width In property (bus width) to
Fan Out property (# of branches) to
3. If you move your cursor over the schematic, your cursor should look as follows:
Now, select which bits to send out to which part of your fan. The least significant bit is bit
0 and the most significant bit is bit
0 should come out on fan arm
6 should come out on fan arm
1, and bit
7 should come out on fan arm
2. FYI: the
None option means that the selected bit will not come out on ANY of the fan arms.
Once you configure your splitter, you can place your splitter into your circuit.
In1 to the splitter. Attach a 2-input
AND gate to fan arms
2 and route the output of the
AND gate to
Now, interpret the input as a “sign and magnitude” number. Place logic gates and other circuits to make
Out2 to be the negative “sign and magnitude” value of the input. Sign and magnitude is an alternate way of representing signed values - like 2’s Complement, but simpler! The combinational logic should be straight-forward.
We will need another splitter to recombine the fans into a single 8-bit bus. Place another splitter with the proper properties (Bit Width In: 8, Fan Out: 3, correct fan widths). Play with the
Appearance properties to make your final circuit as clean-looking as possible.
Answer the following question:
If we decide to take the input and interpret it as a 2’s Complement number, what inputs will produce
Out1 = 1? Hint: What do the first and last bits of a 2’s Complement number being 1 tell you about the number?
With your knowledge of splitters and your knowledge and experience with multiplexers from way back in Lab 3, you are ready to implement a non-trivial combinational logic block:
rotr, which stands for “Rotate Right”. The idea is that
rotr A,B will “rotate” the bit pattern of input
A to the right by
B bits. So, if
5 in decimal), the output of the block would be
0b1001110110101011. Notice that the rightmost
5 bits were rotated off the right end of the value and back onto the left end. In RTL, the operation would be something like
R = A >> B | A << (16 - B).
Implement a subcircuit named
rotr with the following inputs:
A(16-bit), the 16-bit input to be rotated
B(4-bit), the rotation amount (why 4 bits?) Show off your
rotrsubcircuit in the
The output should be
A rotated right by
B bit positions, as outlined above. You are NOT allowed to use Logisim shifters in your solution, though all other combinational logic (MUXes, constants, gates, adders, etc.) is allowed. Logisim’s built-in MUXes (find them under the
Plexers menu) might be especialy helpful. Your solution shouldn’t involve a clock or any clocked elements, like registers.
Hint 1: Before you start wiring, you should think very carefully about how you might decompose this problem into smaller ones and join them together. You should feel very free to use subcircuits when implementing
rotr. If you don’t, expect to regret it.
Hint 2: Just because we gave you an RTL representation doesn’t mean it’s the best way to look at this problem. Think about the input bits of
B and think about how to effectively use splitters! Can you do something with the binary form? Remember why binary is good for use in computers: a
1 is easy to represent as an
ON signal, and a
0 is easy to represent as an
OFF signal. Let’s say we want to rotate
1001 in binary, or
1*8 + 0*4 + 0*2 + 1*1. Can you use this to make a cleaner circuit?
Show your working final circuits for the five parts of this lab to your TA.